How to stick network
Advice how to plant network
For a successful net fishing, as we know it is not enough just to associate the canvas must be properly and competently to impose on pre-purchased cords. All the subtlety lies in the fact that when getting fish in the network, it was not possible to collect a large part of the network itself, thereby creating a bias network which in turn is little likely to hit other fish.
For inserting setepolotna cords must have the following:
1. Cords floating, sinking.
2. The Shuttle wound with a nylon thick thread.
For a quality landing net need to know the weight and buoyancy of the cords and the height of the net which will stick. With the wrong selection of weight, buoyancy, and size of the network it may happen that the network will be either on the surface or to sink under the weight of not only goods, but also their own weight setepolotna.
Usually if the network has a height from 1.8-3.0 meters and is made of threads thinner than 0.5 mm using the floating cord 6гр/m, and the sinking 14гр/m. This allows the cord to smoothly bring up the network under water and a bit of pull due to the floating cord. If you take the cord with more lifting power (buoyancy big weight for one meter) network is spanned by a cord hard and it will not allow the fish to get lost, she’s just passing by Darnitsa in the network and sensing a barrier in the form of solid walls just move or pass along the network.
Now directly on how to spread setepolotna cords. Not immediately once the canvas is bound to put on a thick string. Need the room pulling the start cord and fixing securely bind the end of a nylon thread wound on the Shuttle to the cord, pass through four cells and put on a fifth thread, make it about 2-3 inches and tie that the fifth cell to the cord that host which is considered robust and reliable, and the next cell in the string slack and the fifth is tied to the cord. As soon as the cord is attached to the network you can also start to tie the bottom. The only feature of mounting the sinking of the cord consists in the following. There are two ways of fixing the sinking of cord:
The second method is faster and more convenient.
The choice is yours.