Malfunction spinning reels
In addition to the lack of a decent catch, not that it’s not sad fisherman as breakage of operational equipment for fishing. Torn fishing line, broken gear, broken spinning – all this can spoil the mood of the fans of this sport.
One of these unpleasant things is the breaking of spinning reels.
Coil is probably one of the few devices for fishing, which has a rather complicated mechanism and reasons of its failure can be several.
Breakage of the coil as a result of improper care.
This group can be divided into two main causes of breakage of the coil.
Careless attitude. Here we are talking about those moments when the fisherman is not watching the reel, considering that the manufacturer has protected it from damage and foreign particles. This is not so. Mostly coils fail after getting water in them that promises increased noise when it is working due to changes in the structure of grease, sand, what does the damage to bearings, resulting in operation of the device will not be as smooth as the purchase.
Not rare “culprit” failure is a banal blow, the consequence of which is a bent part or breaking the coil into several parts. After these executions, the coil is unlikely to be able to fulfill his “destiny”.
Improper storage. It should be noted that the storage coil in the cold, dampness or heat, may result in corrosion, deterioration of rubber component and bringing the lubricant into disrepair. All this makes it impossible to continue the coil.
Important! Proper storage of the coil is its packaging in pouches or boxes to the gear.
Breakage of the coil as a result of active service
If the fisherman is satisfied that the first group of causes of the breakdowns does not apply to malfunction, the problem arose in the course of its use.
The types of faults
- The failure mechanism of the main transmission. Signs of the rumbling, jamming, wedging the coil in the process. Causes wear of the axis and breakage of teeth of a leading gear after the test load. Most likely to occur because of the attempts to pull the fishing line, reel for its intended use and careless fishing.
- The fault the axis of the leading gear. The reason for the loss of the bearing, which must be corrected, replace the bushing.
- The self-tightening clutch. The reason of poor quality purchase. Initially, the manufacturer made a mistake, so this failure promises a fisherman buy a new coil.
- Stop movement of the spool, laying the line. The reason is not a suitable load for this coil type.
- The reduction of the distance of the cast. A sign of bad laying of the line. The reasons for the initial failure of the mechanism or the ingress of foreign particles.
- The failure of the system reverse. Causes a thickening of the lubricant in the cold, foreign objects or deformation of compression springs.
- Too noisy work roller. Causes decrease in lubrication of the bearing or foreign matter in mechanism.
- The destruction of the line because of damage to the spool. The causes of scratches, dents and other changes that entail lack of a vanishing line and its further abrasion.
- Rattling in the handle. The reasons for the initial failure of the coil, wear of the handle or unwinding the clamping screw.
- The cliff line. Causes a random snap of the arc due to the loss of elasticity of the return spring, wear of the component parts of an arc or fault of the follower.
In conclusion, we should say that as I hate not to suddenly detect the malfunction spinning reels, in most cases, the fisherman can fix the damage or refer to an experienced master.