Roach to Chub with his hands
Inexpensive and catchability bait for catching chubs can be made at home by themselves from the old silicone lures, remnants of which every angler are always full.
You must follow a few essential recommendations to get the desired result. In this case, unimportant set of materials that will be used. The components given below are not unique and can be replaced by analogues with similar characteristics.
So, we will need:
1. Silicone lure with damaged buildings and cut off the tail parts (as a rule, vibrohvosta or twisters).
2. A pair of scissors.
3. The material for the legs (most often this part is damaged such as silicone baits, lots of silicone fibers, silicone bait type squid, pre-cut to length).
4. A needle and thread.
In the present review, we used beams of silicon filaments, ordered Aliexpess. To help you find wishing to repeat – ordered filament from the lure of the spinnerbait type.
Assembled kit will allow you to independently produce enough beetles of different sizes and colors (bees, grasshoppers, etc.).
Do the following algorithm:
1. A great bait to do does not make sense because a predator that hunts near the surface, relatively small (up to 1kg), so the tailless silicone cut a piece of 3-4 cm.
2. Take a needle threaded with a thread (the thread take shorter) and connect the ends of one node.
3. Silicone pierceable with a needle to the eye was the knot of the thread.
4. Threading the loop of the thread silicone cups (you can take 2-3 pieces), bend them in half and align the ends. Then gently pull the thread until the silicone does not appear the legs, then pull them.
5. On the one hand turned legs finished lure, with the other loop. Derive the loop so that the legs on both sides have the same length. Align the two sides and cut the loop
6. Repeat the operation with the 3-rd to 5-th, 2 more times making punctures evenly at the same distance.
The result is like a… cockroach. The legs of the bait, despite the fact that sticking out in different directions, soft and flexible. Under the action of currents or jerking legs move, simulating a fall into the water insect.
The options for the attachment of a cockroach:
1. Is passed through a cockroach along the longitudinal axis a leash (guitar string 0.4 mm), make a loop at the head part for tying fishing line to a hook at the rear of the fasten tee № 2,5 or number 3 (numbering of the domestic).
2. Just catch the cockroach in the head part of the hook tip when not hiding. Take carp hooks №9 or 10 (numbering domestic).