The imitation fish with their hands
The imitation fish with their hands
Almost every fisherman has information about the existence of a large number of different gear designed for fishing any species of fish. This article describes the Gerlich. This rigging is intended for winter fishing of predatory fish, especially pike.
- 1 Types of Gerlich and how they catch pike
- 1.1 imitation fish on the platform
- 1.2 imitation fish with vertical stand
- 1.3 imitation fish type tripod
- 2 it is Important for each design
- 3 Package contents imitation fish for pike
- 4 Device drawings and winter imitation fish
- 4.1 Fig.1. The base of the imitation fish
- 4.2 Fig.2. Ways of fastening of the coil to the base
- 4.3 In Fig.3 is a diagram of mounting of parts of imitation fish
- 5 the Process of making winter imitation fish with their hands
- 5.1 imitation fish of galvanized and stainless steel wire
- 5.2 Of the plastic tube
- 5.3 Design on a wooden frame
- 5.4 Ice-the imitation fish
- 5.5 dural strips and steel wire
- 5.6 Two types of rubber hose with the use of a spring of the clock
- 6 Original imitation fish out of the bottle and an electric zherlitsa
- 7 Design with indicator lamp
- 8 the Design of the tracker
- 9 techniques for catching pike on the imitation fish in the winter
- 9.1 How to catch pike on lakes and ponds
- 9.2 Conclusion
Types of Gerlich and how they catch pike
This helps tackle the winter pike fishing as other types of lures she refuses to bite. Despite the fact that there are both winter and summer construction, principle of operation they are almost the same. The design of such gear includes a spool of fishing line and a flexible plate at the end of which is mounted a bright box. The spool of fishing line and the plate placed on a special holder.
As far as we know, there are several types of zherlits:
- on the platform;
- with the vertical stand;
- type tripod;
- imitation fish with a flat base.
Imitation fish on the platform
Popular imitation fish with a flat frame because of the simplicity of design and operation. It is easy and quick to install on the ice. Moreover, the flat base covers the hole, not allowing it to quickly freeze. In addition, it shades the hole, making the gear more efficient.
And yet, despite such promising indicators, this structure also has disadvantages. As noted by the lovers of winter fishing such imitation fish freeze to the ice and quickly fail. In the presence of wind such imitation fish just blows in the direction from the hole.
Imitation fish with vertical stand
Given the fact that such imitation fish are made of metal, the problems with its operation can not be avoided. At a strong frost it is impossible to work with open arms, especially if hands are wet, and ice-fishing in any way. Closer to spring when the sun begins to warm, the metal is heated very quickly and the connections of imitation fish starts to melt the ice, causing it to collapse.
Imitation fish type tripod
This design is on three legs, and it is made of aluminum. As with all types of zherlits, it consists of coils of fishing line and signal pole. Despite its apparent strength, she could easily drop in the event of a bite. In addition, it just might blow away with the wind. The disadvantage of this design is the complexity of its manufacture. The advantages are compactness and ease of use.
It is important for each design
In any design imitation fish should be the main elements that affect the efficiency and ease of use. What you should pay attention:
- To bite was visible at a considerable distance, the signal check box only applies vivid coloring.
- The basic structure of the coil must be plastic. The turns of the coil should not be easy, or bites the fishing line will get tangled up.
- The spool is wound a sufficient amount of fishing line so you can fish at different depths.
- Element, indicating a bite, needs to have sufficient flexibility.
Package contents imitation fish for pike
The Foundation of any fishing tackle is fishing line. Imitation fish because the fishing line is operated not as intense, for its equipment line will fit any company or any manufacturer.
The line diameter is selected depending on fish size and can be in the range from 0.2 to 0.4 mm. As a rule, the coil is wound up to 25 m line. The leash is a must. Will fit both the metal and fluorocarbonates leash, as long as the pike could not eat. Depending on the size of the bait is chosen and the weight of sinkers. The weight ratio of bait fish to the weight of the load should be in the range of 1:2,5.
If zherlitsa is set on the river, things are more complicated here, since the magnitude of the load is selected depending on flow rate. Importantly, the shipment was able to keep live bait at one point, closer to the bottom.
The device and the drawings winter imitation fish
Fig.1. The base of the imitation fish
In standard equipment includes: base imitation fish (Fig.1), spring signaller box at the base of the coil on the strut and its mount.
As the base can be used such materials like plastic, plywood or aluminum. It is advisable to use aluminium 10 mm thickness. At the base is a node of fastening of the coil (Fig. 2).
Fig.2. Ways of fastening of the coil to the base
- A-block groove under the presser foot, and the retaining screw:
1 – locking screw; 2 – rivet; 3 – strut; 4 – base; 5 – foot; 6 – block groove under the foot.
- B-screw is twisted into the block Foundation:
1 – pin; 2 – screw; 3 – rivet; 4 – base; 5 – area under the foot; 6 – foot; 7 – pin hole.
- In a nut – lamb on a screw:
1 – the screw, twist still; 2 – nut-lamb; 3 – base; 4 – rivet.
In Fig.3 is a diagram of mounting of parts of imitation fish
1 – base; 2 – box; 3 – coil; 4 – stand; 5 – rack clamps; 6 – fixing elements; 7 – hole for fishing line.
In the figure.3 depicts that the center of hole “a” is located at a distance of 12 mm from the edge of the frame and lies parallel with the center fastener. This distance depends on the reversal of the coil, therefore, is experimentally after installation of the coil. The coil center should align with the center of the hole intended for the passage of fishing line.
Fig.4 – rod rack with trim lines.
Fig.5 – bracket for mounting.
Fig.6 – carton for packing.
Fig.7 indicates two options for mounting the indicator:
- through the plate;
- using area:
Fig.8 – shows a rack Assembly.
The process of making winter imitation fish with their hands
Imitation fish of galvanized and stainless steel wire
To bend a reliable framework for imitation fish need to take the wire, diameter not less 3 mm and a length of from 550 to 700 mm. the Wire is bent so that turned out to be short and long end. The short end does not reach is long, about 100 mm. then, the long end is bent so that it formed a holder for the coil.
Signaller of bite, made of flexible steel wire is attached to the short end. By the end of the alarm device is fixed by a bright box.
Of plastic tube
To do this, take a plastic tube and cut off from her part of the tube length from 10 to 16 cm, depending on the fishing conditions. Tube thickness does not play a role. For fishing from the Bank, it can be cut tube lengths from 13 up to 16 cm, and for fishing from the ice, its length can not be more than 10 see
To start at one end of the tube is drilled through hole with a diameter of about 6 mm, and at the other end – a hole with a diameter of 8-10 mm. Through these 2 holes will be thin but strong rope with loops. To one loop, using the latch should secure the fishing line with a hook.
So the bait was in the water (fishing from shore) to the line it should fix the cut foam.
Design on a wooden frame
As a rule, use pine or aspen, which are more resistant to moisture.
Ice imitation fish
Such imitation fish are easy to manufacture, as it will not fit any desired object that is longer than the diameter of the hole. It should be fixed plastic tube with a length of about 50 cm At the end of the tube is propyl so that the fishing line could not get to bite. In the case of bites, the fishing line POPs out of the cut, that enables the rest of the fishing line to freely unroll from the tube. Because the tube is always in the water, such imitation fish left, for example, at night, by the morning freeze. To test it you have to punch next to the hole. Usually, with this method of fishing, the hole hiding in the night, unless there is something.
Of dural strips and steel wire
As the basis of such gear serves as a dural band (1х60х300 mm) curved in the same direction. This will make it easier way to install it on the ice. In the center of the plate drilled hole for fastening of the coil, such as “icicle” or “hole”. Near the coil hole is drilled for the fishing line with a hook.
The spring acts as the indicator of bites, and to its end is attached to the indicator of the bright material. The spring is attached at the end of the base and fixed in the usual pin.
In working condition, the spring pressed pin to the base. In the presence of a bite spring osvobozhdaetsya from a pin and is in a vertical position.
Two kinds of rubber hose with the use of a spring of the clock
- It needs 2 cut rubber hose with a diameter of 1.5-2.0 cm and a length of 10 cm At one end of a rubber hose making the hole for the hinge, up to 30 cm on the other side of the segment is propyl, designed for fastening rope.
As the reel uses the same tube, and wrap-10 meters of cord. One end is attached to the holes using the hinges, and the other end of the rope is inserted into the slot in the other end of the hose. To the free end of the rope attached into the slot, it should tie the weights and leash from the line, a length of 0.5 meters. Manolescu leash connects to the leash of metal, to which is attached the hook. For convenience, the loop is inserted reliable the stick, the length of which is greater than the size of the hole.
As alerter bite is folded from cut stylistas wire which carries the spring. As the stopper serves the same detail.
- Stand is made of wood. It drilled a hole with a diameter of about 3 mm. the nylon cord to the rack mounted steel cut and bent circuits to which is fixed the spring with a signal element.
Usually, the design margineda in ice and it only remains to install it in operating position by bending the spring and securing it with a stopper. In the event of a bite, the stopper is released, and the spring is bent, signaling a bite.
Original imitation fish out of the bottle and an electric zherlitsa
The principle of the electric imitation fish based on the closure of the contacts. Assembly technology electric gear:
To make imitation fish out of the bottle, should take the container of baby powder. Through it will pass the nylon thread with a sinker and a tee. At the end of the nylon thread loop is formed, through which the tackle is suspended to the base.
Design with indicator lamp
The main difficulty of manufacturing this gear is in the design of the trigger mechanism, consisting of a Lodge, fishing line and two clamps.
Staples are inserted in the base. They are, in fact, are fastening elements Lodge. They are placed on the edge of the frame. At the end of the gatehouse is set light, to which is connected the 2 wires connected to the terminals by means of copper plates and a gatehouse. The battery is connected to the terminals. In the result of the bite is triggered, a pointer mounted in a vertical position, closing the contacts. As a result, the light on top of the gatehouse.
The design of the tracker
The design of the “beacon” includes:
1 – ring of motoviltse; 2 – filament box; 3 – motoviltse; 4 – retainer; 5 – line; 6 – anchor in the form of olives; 7 – rubber stopper; 8 – nut; 9 – the box; 10 – hook; 11 – pin; 12 – stand; 13 – a ring stand.
As a rack applied to the wire, with a diameter of 3 mm and length 70 cm plays a Role of motoviltse tube, with a diameter of 3.5 cm and length 12 cm.
Fishing line with a diameter of 0.8 mm and a length of about 20 m is wound on a tube (motoviltse).
Ring stand and ring tubes are held together with pins. To reel (tube) nazivaetsa ring is used to fasten the fishing line. The burden of the olives and the limiter are on the line. Nut onto the tube, and the nut is installed check box.
Before installing the gear box is pressed against the motoviltse, then it is fixed by means of a scaffold. In the case of bites, the fishing line unwound from the box, freeing it. As a result, the box occupies a vertical position.
Fishing technique of the pike on the imitation fish in the winter
As a rule, the pike caught in the ponds with stagnant water or in bays where there is no current. This ensures the safety of fishing even in mild frosts. On the river, where there is a current danger on thin ice, quite high.
How to catch pike on lakes and ponds
To fishing was successful, you should consider a few points:
- Correct installation. This activity is best done in the daytime. The trap should be installed correctly, otherwise it will fail in the most unexpected moment.
- The choice of new places. To find the Parking lot of a predator, you need to cut a few holes and install them imitation fish. On familiar bodies of water this process is somewhat simplified, as anglers well-known bottom topography. Suitable places can be gully areas, large differences in depths and locations with a variety of underwater piles. Pike can also be found in places where there are reeds or rushes.
- Correct snap-imitation fish. Here, everything has meaning, from the selection line and ending with the choice of live bait. A lot depends on the type of fish, which live in the pond.
- Knowledge of fish behavior in winter. Such knowledge will help to determine a promising location.
Predator fishing such as pike on the imitation fish has several advantages compared to other ways of fishing. Most importantly, over the tackle, no need to stand, to run from one hole to the other, waiting for the fish to bite. But this does not mean that production will easily get. This is a serious misconception. First, you will have to drill one hole, maybe 10 or more. Second, each hole need to install hooks under the ice, but it is also hard work. Thirdly, in the case of bites will have to run from one gear to another, and they are at a distance of about 10 meters or more. And fourth, the equipment must be regularly checked, and it’s the same effort and time. And when you consider that the winter angler is dressed in warm clothing that restricts movement and increases the total weight, you can imagine how much effort and energy will be spent in one day of fishing.