Winter float tackle for catching redfin
In winter fish the Rudd is using float tackle or lures. With the onset of frost days would be more effective fishing float. Will tell you more about it.
In cold weather, the fish loves to stay at the bottom, so at this time experienced anglers prefer to catch fish near the ground. To make the float rod alone is not as difficult as it seems. To do this, take a piece of Styrofoam and machined from the knob to which is attached the whip. Then the rod is equipped with fishing line section of 0,18 – 0,14 mm and the handle wound coil. The thinner the line should not be taken as major trophies she can not stand, and if you take the tackle the thicker size of the above, such snap-in will only scare away the fish. At the end of the fishing line is hung the load, weight of 10 – 6 grams, and to it are fixed two leash with small hooks. The float is made of foam or hardened foam. Cut out the required shape, polished, and then made hot wire or awl through the hole in the middle, along the float. Grind match and is inserted into the hole. The float is ready for painting. For coloring we need the two paint colors and varnish. First paint the top part red or bright yellow, then the lower part in gray or brown. After the paint is dry, cover the entire surface of the float clearcoat. And securing the fishing line to the alarm of bites, we can assume that winter float tackle for catching redfin is ready.
Tackle made by your own hands is almost always more reliable and efficient, and the float is made in the way stated above for much longer you will last, and the bite will be noticeable. When will bite Rudd, the indicator starts to move or a little pretplata. This is the moment when you need to do the cutting.
Successful fishing winter roach!